Description
UL/CSA type CMX according to UL 444 and CSA 22.2 No. 214-02
Description
Application
The cable WINDLINK® CAN BUS was specifically designed for wind turbines. These cable is used where torsion- and oil-resistance are required.
Product characteristics
- Vibration resistant
- Flame retardant according to IEC 60332-1-2
- Minimum bending radius during installation
- without load ≥ 5 x D
- with load ≥ 10 x D
- Operating temperature acc. to
- Nexans spec.: -40°C up to +85°C
- UL CMX: -40°C up to +75°C
- Torsion resistant: 2000 cycles ±144°/m at -35°C up to 75°C
- Oil resistant according to EN 60811-2-1
- Halogen free according to IEC 60754
- UV resistant according to ASTM D 2565-92a
- Ozone resistant according to VDE 0472 part 805 - grade 0
Approval
- UL 444
- CSA 22.2 No. 214-02
Design
Conductor
Bare copper stranded, 7-wire
Insulation
Foam-Skin Polyethylene compound
Core indification: colour code according to DIN 47100
Assembly
2 Conductors twisted in pairs + polyester tape + Aluminium/polyester tape (Aluminium outside)
Drain wire
Tinned copper
Shield
Tinned copper braid, coverage ≥ 80% + non woven tape
Sheath
PUR compound, colour black Ral 9005
Characteristics
Construction characteristics | |
---|---|
Construction type | 2 x 2 x 0.34 |
Electrical characteristics | |
Characteristic impedance at 1MHz | 120Ohm |
Max. transfer impedance at 10MHz | 10mOhm/m |
Nominal mutual capacitance | 42pF/m |
Minimum insulation resistance | 100MOhm.km |
Operating voltage | 250V |
Test voltage AC at 50hz conductor /conductor | 1500V |
Test voltage AC at 50hz conductor/screen | 1500V |
Docs and info
Selling information
NEXANS INTERCOND - Week/Year of production - WINDLINK Li-02YS(St)C11Y n x yy mm²/AWG size - E222606 c(UL)us CMX 75°C - CAN-Bus cable
n: number of conductors
yy: section of conductor
Meter marking